Jopower Inch Yellow Fog Driving Light - light bar Manufacturer
  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV
  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV
  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV
  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV
  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV
  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV
  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV
  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV

JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV

  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV
  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV
  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV
  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV
  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV
  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV
  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV
  • JOPOWER 50W 3.5 Inch Yellow Fog Driving Light for SUV Trucks ATV UTV

Description

Product Overview

This round 3.5-inch pod is a yellow fog and driving light for vehicles that spend real hours away from street lighting: pickups and SUVs on winter commutes, ATVs and UTVs on trail duty, tractors working long fields, and fleet trucks running fixed routes through fog, dust and road spray. It is small enough to sit on a bumper, bull bar, A-pillar or roof rack without dominating the front of a vehicle, and strong enough to be worth switching on when the factory fog lamps stop helping. It works alongside the vehicle's own lighting rather than replacing it, so it can be fitted to a vehicle that is otherwise standard and removed again when that vehicle leaves the fleet. Nothing about the way the pod is mounted or powered commits the owner to a wider lighting build. Voltage is the other reason it travels well. Anything from 12V to 48V feeds it, so the same unit goes onto a 12V pickup, a 24V truck and a higher-voltage utility platform without a converter or a second part number in the catalogue. For a distributor that is one line item instead of three, and for a fleet it is one spare on the shelf instead of a shelf of spares. It sits inside our wider off road led light bar and led driving lights range and shares the mounting logic of the rest of the family: a U-shaped bracket, a cable that leaves from the back of the housing, and a body that clears the surface behind it. The yellow LED bulb is chosen specifically for fog and low-visibility driving, and the beam toggles between a wide flood pattern and a focused spotlight.

Promotional collage of off-road LED light pods and factory machineryCompany profile for Dongguan Spotlight Lighting with factory and certificationsFactory facilities, production lines, CNC workshops and testing labsOEM and ODM customization services for LED automotive lightsSix-step product customization process infographic

Beam Control & Light Output

Brightness is the wrong thing to shop for in fog. What decides whether a driver can see is how much of the beam comes back at them off the water droplets, and that is a question of colour and angle rather than output. The yellow lens on this pod filters the beam toward the part of the spectrum that scatters least, so the driver picks up the road edge and the lane markings instead of a wall of white. The reflector sits in a deep cup, which is what lets one 3.5-inch housing produce both a broad flood and a defined spot. Slacken the bracket, change the angle, and the same lamp moves between lighting the ground in front of a plough blade and reaching down a trail. Fleets running led driving lights for trucks tend to fix one setting per vehicle and leave it; owner-drivers change it between seasons. Aiming matters more than most buyers expect. Set the beam low enough that it lands on the road ahead rather than in the mirrors of the car in front, then check it again with the vehicle loaded, because a full bed or a loaded trailer changes the rake of the front end. A yellow beam shows ruts, kerbs and obstacles as shapes rather than glare, and it keeps the driver's pupils from closing down the way they do behind a strong white beam. The two do different jobs, and this pod is designed to sit in the gap rather than compete.

Housing & Cooling Design

  • Finned heat path. Vertical fins run across the back of the housing and pull heat away from the LED board, which is what keeps output steady through a long night shift instead of fading as the pod warms up.
  • Faceted matte black bezel. The bezel is faceted and finished in matte black, which breaks up reflection from the lens and keeps the pod looking intentional on a chrome or colour-coded front end.
  • Built for the way 4x4 off-road lights get used. Mud, salt spray, river crossings and pressure washing are the normal working conditions for led offroad lights, not the exception, and the housing is put together with that in mind. The light delivers consistent, high-penetration output for low-visibility conditions, which reduces operator fatigue and widens the safety margin. Installation is simple and compatibility is broad, so units can be deployed quickly across vehicle platforms without modifying the electrical system.

Mounting & Installation

  1. Pick the position first. Bumper, bull bar, A-pillar and roof rack all work, and between them they cover most offroad lights for truck installations; hold the pod against the surface and check that the bracket can swing through its full arc without touching trim or a number plate.
  2. Mount the bracket, not the housing. Bolt the U-bracket to the vehicle, leave the pivot bolts finger-tight, then hang the pod and set the angle you want before final tightening.
  3. Wire to a switched source. Take the feed from a circuit that is live only with the ignition, through a fuse and relay rated for the load, and keep the run clear of ignition leads and sharp edges.
  4. Dress the cable down and away. The rear exit lets the lead drop in a gentle loop so water runs off rather than into the housing; seal any hole drilled through a body panel.
  5. Aim it at night. Park on level ground facing a wall, set the beam low enough to sit under the mirrors of a car ahead, then repeat the check with the vehicle loaded.
  6. Test before you finish. Run the light for a while, hose the housing down, and check for misting behind the lens before the trim goes back on.
  7. Label the switch. On a multi-light build, mark each circuit at the panel so the next person to work on the vehicle knows which switch feeds these led driving lights.
  8. Match the pair. When fitting two pods as 4x4 off-road lights, set both against the same wall so the beams overlap evenly instead of crossing.

Application Scenarios

  • Long-haul and regional trucking. Fleets that run led driving lights for trucks through the winter often add a low yellow pair in front of the bumper, where the beam lands on spray and fog rather than on the windscreen of the car ahead.
  • Winter maintenance and municipal fleets. Plough trucks and gritters work in the worst visibility of the year; a low-mounted yellow pod picks out the kerb line, refuge islands and parked cars that a high beam loses in snowfall.
  • Off-road and overland builds. In a layout of 4x4 off-road lights and an off road led light bar, the pod earns its place as the light you can actually use in dust and rain, when a long-range white bar is worse than useless.
  • ATV, UTV and side-by-side work. Trail riders and farm buggies mount a single pod on the front rack or bumper for early starts and late finishes, where the vehicle's own lighting is little more than a marker.
  • Construction, plant and yard work. Telehandlers, site trucks and yard vehicles use the flood setting to light a work area at close range and the spot setting to see across a compound.
  • Towing and hotshot runs. Drivers who already fit offroad lights for truck and trailer work add a yellow pod to cut the glare coming back off wet tarmac and reflective signage on night runs.

Emergency & Severe Weather Use

Emergency work is where led offroad lights get judged hardest, because the conditions that make a call-out dangerous are the same conditions that make a headlight useless. Fog on a motorway, smoke near a fireground, dust at a rural incident and spray from a bowser all throw light straight back at the driver. A yellow beam at bumper height reads the surface of the road instead of the air in front of it.

Mounted low, the pod fills the gap between the bumper and the first stretch of road that a raised headlight pattern never reaches. That is the zone where a wheel track, a kerb, a fallen branch or a person on the shoulder appears, and it is exactly the zone a driver needs back in poor visibility. Because the beam angle is adjustable, an upfitter can set it for the ride height of each vehicle rather than accepting one fixed pattern across a mixed fleet.

Readiness comes down to sealing. Vehicles on standby get washed, parked outside and run in all weathers, and a light that mists up after its first hose-down is a light that will fail in service. The sealed housing, gaskets and finned body on this unit are there to survive that routine and to keep output steady when the light is left running for long periods at an incident.

As off road led light bar suppliers we keep the same housing, lens and bracket across the range, which matters when an agency adds vehicles across several budget cycles and wants one spares box rather than four.

Fitting is deliberately plain. The pod runs on the vehicle's existing auxiliary circuit, uses the same mounting hardware as the led driving lights already on the vehicle, and can be moved between units when a vehicle is retired — a practical detail for workshops that rotate equipment between stations.

Agricultural & Utility Vehicles

  • Tractors on late field work. A low pod on the front linkage picks out headland ruts, irrigation risers and fence posts that a high work lamp washes over; these led offroad lights are meant to be aimed at the ground, not the horizon.
  • Telehandlers and loaders. The flood setting lights the area around a bucket or a pallet at close range, which is where most yard and site injuries actually happen.
  • UTVs and farm buggies. One pod on the front rack is enough for stock checks, gate work and moving between fields after dark, and it moves to the next vehicle when the old one is retired.
  • Livestock and yard checks. A yellow beam is easier on animals than a hard white one, and it leaves the driver's night vision intact when they step out of the cab.
  • Harvest hauling and grain carts. Convoys moving between field and store need to see and be seen; the pod pairs with the tractor's own lighting rather than demanding a rewire.
  • Dealer-branded farm ranges. For an agricultural dealer assembling a custom off road lights line for its own customers, the pod can be ordered with the dealer's logo, packaging and housing colour. The adjustable beam angle is engineered to be simple to operate in the field, which suits aftermarket installations as well as OEM customization.

Specifications

On utility, agricultural and emergency vehicles the light helps cut through fog and rain, and it supplements factory lighting rather than replacing it, fitting into the vehicle's existing setup to improve situational awareness. Fleet operators value it for keeping work moving at night and in poor weather while lowering incident risk during demanding fieldwork.

Power50W
Beam colourYellow
Beam patternAdjustable flood to spot
Input voltage12V-48V DC
Water and dust ratingIP67
HousingDie-cast aluminum alloy
LensYellow, impact-resistant
LED chipsCree
CoolingFinned aluminum heat sink
MountingAdjustable U-bracket, rear cable exit
Pod diameter3.5 inch
LifespanOver 50,000 hours
FinishMatte black faceted bezel

Ordering & Delivery

Stocked items leave the factory on our 7-day fast shipping schedule. It is the same dispatch window we hold across the range, and it is usually the first thing distributors check when they compare off road led light bar suppliers on delivery rather than price alone.

Custom work takes longer. Your logo on the bezel, your own packaging, a different housing colour or a size we do not hold on the shelf all need a production slot, so confirm the dispatch date with your sales contact before you commit to a launch date.

Tell us what the light is going onto when you order. A 24V truck, a 12V side-by-side and a 48V utility platform all take the same pod, but the cable length, connector and bracket kit you want may differ, and it is easier to settle at quotation than after the cartons are packed.

The size chart on this product shows the round housing measured against the 3-inch and 2.8-inch versions of the same shape. If you plan to stock more than one size, say so in your enquiry and we will confirm which sizes are available for your order rather than assuming the 3.5-inch is the only one you want.

Certification paperwork for CE, RoHS and DOT is part of what we hold. Tell your sales contact which market the goods are going to and which documents your customs broker or purchasing team needs, and we will match the pack to it.

Minimum order quantity, packing configuration and payment terms are quoted per order. Ask for them with your enquiry and they will come back in writing.

If you are building an off road led light bar range rather than buying a single item, ask for the family sheet — the same bracket and voltage window run across the pods, bars and work lights, so the range can be quoted as one programme.

The commercial case for this pod is that it collapses several products into one. A reseller does not have to stock a separate flood lamp and a separate spot lamp, because the beam adjusts, and does not have to talk a walk-in customer through which version to buy. One carton covers a shelf that would otherwise hold two. Service life is the second saving. Every unit replaced under complaint costs labour, freight and goodwill, and most of those failures come back to water in the reflector or heat cooking the LED board. A sealed housing and a finned body address both, which is why this pod can go into fleet accounts without the return rate following it. Because it supplements factory lighting rather than replacing it, the pod also sells to buyers who are not ready to re-wire a vehicle. It goes onto an existing auxiliary circuit or a switch panel, and it can move to the next vehicle when the current one is sold — a detail that matters to a small fleet turning vehicles over every few years. For a buyer assembling an off road led light bar range for a national account, the useful point is that this pod shares its voltage window and mounting logic with the rest of the family, so it can be quoted alongside bars and work lights without a compatibility conversation. For anyone building a private label, it is a straightforward custom off road lights starting point: housing colour, bezel branding and packaging all take your mark, and the beam behaviour stays the same from run to run.

Scale & Supply Capability

JOPOWER is the brand of our own factory in Dongguan, China, founded in 2010 and run by a team of 20–30 people with 15 years of vehicle lighting production behind them. We add 5–10 new styles every month, hold EU, CE, RoHS and US DOT certification, and put every unit through three full inspections before it leaves us. Because the designs are developed in-house, we can tailor specification, style, size, color, logo and packaging, and items in stock ship in as little as 7 days.

FAQ

What materials are used in the construction of this fog driving light?

The housing is die-cast aluminum alloy, chosen for corrosion resistance and for the way it spreads impact load away from the lens. The lens is yellow and impact-resistant, seated on gaskets and clamped to the body so the seal holds, and the cable leaves through a sealed exit at the back. The bracket is a separate part, which means a damaged mount is a small replacement rather than a whole new lamp.

Can I request custom designs or branding on your off-road LED lights?

Yes. We build custom off road lights to order, and that covers size, colour, logo and packaging — the housing colour, the branding on the bezel, the carton and the instruction sheet can all be set up for your range. Send your artwork and the market you are selling into, and we will confirm what can be changed and what has to stay as it is for the light to keep its IP67 rating.

Is this fog driving light easy to install on different vehicle types?

It is about as close to universal as an auxiliary light gets. The adjustable U-bracket bolts to a bumper, bull bar, A-pillar or roof rack, the input accepts 12V to 48V so the same unit suits a 12V pickup and a 24V truck, and the wiring goes to any switched auxiliary circuit. Nothing in the vehicle's own electronics has to change. The one thing worth checking before ordering is clearance behind the mounting surface for the bracket arc and the rear cable exit. It is the same fitting pattern used across the led driving lights for trucks we supply, so a workshop that already installs our pods will recognise the hardware.

How does JOPOWER ensure consistent quality in its off-road LED light bars?

Every unit passes three inspections before it leaves the factory, from incoming components to the finished light, and the range is built to CE, RoHS and DOT requirements. In practice that means the LED board is checked before assembly, the finished pod is aged and beam-tested in a darkroom, and the housing is checked for seal integrity — the three things that decide whether a light survives its first season. As off road led light bar suppliers we would rather hold a line than ship a batch that comes back.

Does the yellow beam actually help in fog compared with white light?

Yes, and for a simple reason: shorter-wavelength light scatters more in water droplets and dust, so a white beam throws more glare back at the driver. Yellow keeps more of its energy on the road surface, which is why fog lamps have been yellow for decades. The trade-off is that yellow shows less colour detail at distance, so most drivers run it low and wide as a supplement to white headlights rather than as a replacement. That is why offroad lights for truck winter kits are usually yellow while the long-range lamps stay white.

Can I switch the beam between flood and spot from inside the vehicle?

The adjustment is mechanical rather than a dash switch. The pattern is set by the reflector's spread and by how the pod is aimed on its bracket, so changing between a wide setting and a tight one is a minute's work with a spanner. Most fleets set one angle per vehicle and leave it, while owner-drivers change between a wide setting for yard and trail work and a tighter one for road use. If you need to change patterns while driving, the answer is two pods on separate circuits rather than one pod adjusted on the move.

Can the pod be wired into a switch panel or the factory fog circuit?

Yes. It draws its power through a switched circuit, so it can run from a dedicated switch panel, an existing auxiliary circuit, or a relay triggered by the factory fog-lamp feed. Tapping the factory circuit is the neatest option when a vehicle already has an unused fog-lamp switch, but check the circuit rating before adding load. On multi-light builds, keep each pod or pair on its own fused channel so a fault takes out one light instead of the whole set.

CONTACT US

If you have any queries, get in touch today! Don't hesitate. We try to take the extra step for our customer satisfaction.
Name *
Email *
Phone / Whatsapp
Message *
Verification code *
Click to verify