Jopower Offroad Truck Driving Light - driving light Manufacturer
  • JOPOWER 50W 3.5 Inch IP67 12V White Offroad Truck LED Driving Light
  • JOPOWER 50W 3.5 Inch IP67 12V White Offroad Truck LED Driving Light
  • JOPOWER 50W 3.5 Inch IP67 12V White Offroad Truck LED Driving Light
  • JOPOWER 50W 3.5 Inch IP67 12V White Offroad Truck LED Driving Light
  • JOPOWER 50W 3.5 Inch IP67 12V White Offroad Truck LED Driving Light
  • JOPOWER 50W 3.5 Inch IP67 12V White Offroad Truck LED Driving Light

JOPOWER 50W 3.5 Inch IP67 12V White Offroad Truck LED Driving Light

The JOPOWER 50W 3.5 Inch LED driving light offers robust illumination with IP67 waterproof rating, ideal for offroad vehicles. Engineered by a trusted driving light manufacturer, it suits trucks and SUVs needing durable, efficient lighting.

  • JOPOWER 50W 3.5 Inch IP67 12V White Offroad Truck LED Driving Light
  • JOPOWER 50W 3.5 Inch IP67 12V White Offroad Truck LED Driving Light
  • JOPOWER 50W 3.5 Inch IP67 12V White Offroad Truck LED Driving Light
  • JOPOWER 50W 3.5 Inch IP67 12V White Offroad Truck LED Driving Light
  • JOPOWER 50W 3.5 Inch IP67 12V White Offroad Truck LED Driving Light
  • JOPOWER 50W 3.5 Inch IP67 12V White Offroad Truck LED Driving Light

Description

Product Overview

A 3.5-inch round auxiliary lamp with a 50W LED array behind a clear reflector lens, built to put a usable band of white light ahead of the bumper on pickups, SUVs, light trucks, ATVs, UTVs and the utility machines that share the same yard. The body is die-cast aluminium with deep fins across the back, the lens sits sealed into the housing, and the whole light is small enough to mount where a long bar will not go. JOPOWER has been building vehicle lighting in Dongguan since 2010, and as one of the LED light bar manufacturers supplying the aftermarket, we keep this platform in continuous production so an order placed next quarter matches the one you fitted last quarter. Distributors, 4x4 shops, repair workshops and fleet maintenance teams buy these offroad led lights because they can be fitted the same day, sold on their specifications and reordered by the carton. Nothing is guessed between quotation and production - the sample you approve is the reference the batch is built against.

Performance Advantages

  • White output shaped for the road. The reflector gathers the 50W array into a forward beam that fills the band between dipped headlights and the treeline, so verges, marker posts and obstacles show up earlier on an unlit road; it is the difference between round offroad lights that light the road and ones that only light the bumper.
  • A yellow setting for bad visibility. Fog, dust and driving rain throw white light straight back at the driver. Switching to the warmer output cuts that glare and keeps the road edge readable without adding a second lamp to the bar.
  • Rated per light, not per pair. The 50W figure applies to each lamp, so two lights give full output on both sides and a quotation is not quietly halved.
  • Low current draw. The array pulls far less than the halogen lamps it usually replaces, which matters on a vehicle already running a bar, a work lamp and a winch off a standard alternator.
  • One lamp, not a whole bar, if something fails. A damaged unit unbolts and is replaced on its own, so a fleet does not lose a six-lamp bar to one cracked lens.
  • Pairs that read evenly. Two lights built from the same optical set sit at the same height and throw the same pattern, which is what a customer notices first on a finished build.

Quality Control

  • Three inspections before dispatch. Every batch is checked at the line, at assembly and again before packing - the same routine across the range, and the reason a distributor can treat us as one of their standing LED light bar manufacturers.
  • An aging run before packing. Each led driving light is powered and left running; a unit with a weak driver or a poor solder joint usually shows up in that window rather than in a customer's hand.
  • Darkroom beam check. Beam shape is read in a darkroom against a target, not judged by eye in a lit workshop where every lamp looks bright.
  • Sphere testing for output. Finished lamps and LED chips are measured on an integrating sphere, so what is in the carton matches the sample you approved instead of drifting batch to batch.
  • Salt spray and temperature cycling. Housings and seals go through salt spray and high and low temperature testing - the two conditions that age these offroad led lights fastest on coastal fleets and winter roads.
  • Approve a sample before a branded run. If the order is going out under your own logo, ask your sales contact about sample availability so the beam and finish can be checked against your own vehicle before the full batch is built.
  • The body is die-cast aluminium alloy with deep fins across the back, not a plastic shell with a metallic coat. Those fins are why the light holds its output on a long night run: heat moves off the emitter into the casting and away into the air instead of building up behind the lens. The finish is a matte black that still looks like a housing after a winter of road salt rather than going chalky. The lens sits on a gasket and is bonded to the housing to hold an IP67 seal - dust-tight, and protected against water from jets and heavy rain. The power cable leaves through a sealed entry in the back centre, so it is not being pulled sideways through a gland on the edge of the body where a rock or a branch can catch it. The clear lens carries a reflector ring around the central emitter, and that ring is what turns a bright chip into a shaped beam. The bracket bolts to the casting itself, which means a knock bends or scuffs a bracket rather than cracking the housing open. That single detail decides whether a set of offroad led lights comes back as a claim or earns a reorder, and it is why we do not glue or clip the mount on.

Vehicle Compatibility

  • 12V and 24V vehicles. The input covers passenger pickups, SUVs and light trucks as well as 24V heavy vehicles, so one part number serves a mixed fleet instead of forcing two lines in the warehouse.
  • Higher-voltage utility platforms. UTVs, tractors and specialist equipment running above 24V can be wired directly where the system falls inside the range, with no step-down converter to fit and hide.
  • Round offroad lights suit awkward mounting points. The 3.5-inch body and base bracket sit on bar clamps and bumper plates that would foul a wider rectangular pod, so a pair can go on without re-drilling the bar.
  • Measure before you drill. Check the hole spacing on the bar and the clearance behind the housing for the fins and the rear cable; those two measurements decide whether a pair goes on cleanly or rubs trim.
  • Standard negative-earth DC. Confirm the arrangement before ordering if a machine runs positive earth or an unusual charging setup, because that needs a different wiring approach from the one in the fitting sheet.
  • Position changes the result. Bumper and grille mounting is the usual choice when offroad lights for truck drivers want light on the road ahead; roof rack and A-pillar positions push the beam further but catch more glare on the bonnet.

Mounting & Installation

  1. Fitting truck driving lights starts on level ground: switch off the ignition and disconnect the battery earth before touching any wiring.
  2. Offer the bracket to the bar, bumper or rack and mark the holes, checking behind the panel for wiring, brake lines or anything a bolt will foul.
  3. Bolt the bracket down with the supplied hardware and leave it just snug so the housing can still move for aiming.
  4. Set the angle with the vehicle loaded as it normally runs, aiming slightly down so the beam lands on the road rather than in mirrors or oncoming traffic.
  5. Route the pre-fitted cable along the existing loom, clear of exhaust heat, steering and moving parts, and seal any new hole through bodywork.
  6. Connect to a fused, switched circuit - a relay and a dash switch keep the light independent of the headlight circuit. Each led driving light draws little, but size the feed and fuse for the pair.
  7. Reconnect the battery, test both lamps, then torque the bracket bolts and re-check the aim before the vehicle leaves the bay.

Use Scenarios

  • Night trunking and rural delivery. On a box truck or pickup running unlit roads, a pair at bumper height fills the dark band between dipped beam and the treeline - the stretch where deer, cyclists and dropped loads appear, and the reason most led driving lights for trucks are bought two at a time.
  • Off-road and overland builds. Offroad lights for truck builds mount on the bull bar, grille or roof rack to give trail drivers forward light at low speed: reading a line through ruts, spotting a gate, checking a recovery point before the winch goes tight.
  • Farms and mixed estates. Tractors, telehandlers and utility UTVs often work the hour before sunrise, and a voltage range that spans older 12V machines and newer equipment lets one order cover the whole property.
  • Construction and quarry sites. Site pickups and service vans spend the day on unlit haul roads and get washed down at the end of it, so the light has to survive grit and spray rather than look good in a catalogue.
  • Winter maintenance and recovery. Gritters, ploughs and recovery trucks work in salt and spray, where a lamp that fogs up is useless within a month and the fitting has to be right first time.
  • Workshops fitting customer vehicles. A bracket-supplied lamp keeps turnaround short: two bolts, a switched feed and an aim check, and the vehicle is out of the bay the same afternoon.

Specifications

SpecificationDetail
Power50W per light
Light sourceHigh-intensity LED array, white output with a selectable yellow setting
HousingDie-cast aluminium alloy, finned
LensClear reflector lens
Ingress protectionIP67
Operating voltage12V-48V DC
BeamAuxiliary forward driving beam
MountingBolted bracket, mounting hardware included
WiringPre-fitted power cable, plug-and-play connection
Body size3.5 inch
FinishMatte black housing

Road Use & Compliance

  • Auxiliary light, not a substitute headlamp. This lamp adds reach beyond dipped beam; it is not built to replace a vehicle's headlight. Wire it through its own fused switch and relay so the driver can kill it instantly in traffic, at a checkpoint or when meeting oncoming vehicles.
  • The rules follow the registration, not the factory. Some countries and states accept an auxiliary driving lamp only when it is used together with main beam; others restrict it to off-road use, private land or works sites. Confirm the requirement for the market where the vehicle is registered before anything is printed on a carton or a listing.
  • Mounting height and aim settle most roadside arguments. A lamp aimed slightly down keeps the beam on the road and below the glare line; the same lamp set high on a roof rack or A-pillar reaches further but throws far more light into mirrors and windscreens.
  • Paperwork travels with the goods. Our production holds EU, CE, RoHS and US DOT certification, and your sales contact can confirm which documents apply to the exact version you order, so a distributor or fleet customer has a file to keep with the shipment.
  • A switched circuit keeps working vehicles on the right side of the line. Gritters, tractors and site pickups that only need the lamp on private ground can leave it off on the highway; a labelled dash switch makes that a deliberate choice rather than an oversight during an inspection.
  • Match the packaging to the requirement. If your market asks for a marking, a language-specific label or a warning sheet in the box, agree it at artwork stage, so the printed carton and the certificate tell the same story when the pallet lands.
  • Raise it before a fleet tender, not after. Many buyers of led driving lights for trucks write the country, vehicle type and intended use into the tender. Tell us those three things at quotation stage and we will confirm what this model can be supplied and sold as, including whether a custom lights for trucks programme needs a different marking on the housing.

Customization & Private Label

Trade buyers rarely sell an unbranded lamp for long. If you want your own identity on this light, we can work on the housing finish, a printed logo on the body, and the packaging your channel needs - printed box, foam insert, barcode label, whichever your channel requires. Send the artwork and the packing specification and you get a proof back before anything goes into production.

Specification changes are the other half of it. Housing colour, cable length, connector type and beam configuration are worth raising at quotation stage rather than after the batch is built. If the vehicles you are fitting run an unusual system voltage, say so at the same point, so the light is built for them instead of being adapted afterwards.

This is how custom lights for trucks programmes usually begin: a distributor wants a house brand for a fleet account, or an e-commerce seller wants a box that photographs well and survives a courier. We keep the same core housing and optics underneath, so the light you sell under your own label is the one whose beam pattern you already approved.

Nothing is printed until you sign off the proof, and reorders run from the same artwork file, so the second carton matches the first.

Ordering & Delivery

Stock items move under our 7-day fast shipping arrangement, and most trade orders mix stock lines with made-to-order work. Give your sales contact the quantity, the finish and whether the lights carry your own branding, and the schedule you get back reflects the actual build rather than a catalogue figure.

Orders of these led driving lights for trucks are quoted per order with the bracket and hardware packed with each lamp. Shipping method, packing style and the after-sales terms that apply in your market are set order by order - ask for them in writing with the quotation, along with the payment terms, so there is no disagreement later about what was agreed.

When you reorder truck driving lights, quote the same part number and specification note as the first order and the batch is built to that reference. If a fleet standard has changed - a different connector, a new finish, a revised voltage - raise it at quotation stage rather than after production has started.

Scale & Supply Capability

JOPOWER is the brand of our own factory in Dongguan, China, founded in 2010 and run by a team of 20–30 people with 15 years of vehicle lighting production behind them. We add 5–10 new styles every month, hold EU, CE, RoHS and US DOT certification, and put every unit through three full inspections before it leaves us. Because the designs are developed in-house, we can tailor specification, style, size, color, logo and packaging, and items in stock ship in as little as 7 days.

Factory banner showing LED light bars, certificates and production equipment.Company about-us banner with factory building, vehicles and certification marks.Factory production lines, CNC workshop, temperature and lumen testing.Promotional banner listing OEM service, free design and ready stock.Customization service infographic with OEM/ODM, custom packing, logo and color options.Six-step customization process infographic from customer contact to after-sales service.

FAQ

What keeps this light sealed on wet, dusty jobs?

The lens is gasketed and bonded to a die-cast aluminium housing to hold an IP67 seal, which means dust-tight and protected against water from jets and heavy rain. The cable leaves through a sealed entry at the back centre, so it is not being pulled sideways where grit can work at it. If a lens ever fogs, check that entry and the lens seating first - that is where moisture usually gets into offroad led lights, and it is more often a routing problem than a failed seal.

Can you build this light for a non-standard vehicle voltage?

The standard unit runs on 12V to 48V DC, which covers most pickups, trucks, SUVs, ATVs, UTVs, tractors and utility platforms. If a fleet sits outside that, tell us the system voltage and the machine it goes on and we will confirm what can be built. The same conversation applies when custom lights for trucks are being specified for a tender, where the electrical requirement is fixed before anyone quotes.

Do I have to modify the vehicle to mount a pair?

Nothing on the housing or the factory wiring has to be cut. Each light comes with a bolted bracket and mounting hardware, and the power cable is already fitted, so the job is drilling or using existing holes, routing the cable and connecting to a fused switched circuit. Round offroad lights this size also go where a bar will not, which is why they turn up on crowded bull bars and grille openings - measure the hole spacing and the clearance behind the body before you drill.

Is this light meant to replace a headlight?

No. It is auxiliary lighting: extra reach beyond dipped beam and a lit verge on unlit roads. Wire it to its own switch and relay so it can be turned off in traffic, and check the road-use rules for auxiliary lamps in the market where the vehicle is registered. Those rules vary, and an led driving light that is fine on a works site or private land may not be legal on a public road.

How does the light handle heat when it is tucked behind a grille?

The housing is finned die-cast aluminium, so heat leaves the body through the fins rather than sitting around the emitter. Leave an air gap behind them and avoid mounting flat against a solid panel or a layer of insulation. On truck driving lights fitted behind a grille or a winch bumper, that clearance matters more than the size of the lamp; if the space is tight, tell us the mounting position and we will suggest an orientation. Offroad lights for truck builds on a roof rack or an open bar have the easiest time of it, because air moves across the fins.

CONTACT US

If you have any queries, get in touch today! Don't hesitate. We try to take the extra step for our customer satisfaction.
Name *
Email *
Phone / Whatsapp
Message *
Verification code *
Click to verify