Jopower Flood Off Road Led Work Light - road lights Supplier
  • JOPOWER 36W 4.5" Round Flood Off Road LED Working Lights
  • JOPOWER 36W 4.5" Round Flood Off Road LED Working Lights
  • JOPOWER 36W 4.5" Round Flood Off Road LED Working Lights
  • JOPOWER 36W 4.5" Round Flood Off Road LED Working Lights
  • JOPOWER 36W 4.5" Round Flood Off Road LED Working Lights
  • JOPOWER 36W 4.5" Round Flood Off Road LED Working Lights

JOPOWER 36W 4.5" Round Flood Off Road LED Working Lights

36W LED work light with flood beam, IP67 waterproof, durable aluminum housing, and 9-30V compatibility—perfect for fog lights, driving lights, and backup lights.
Brand
JOPOWER
Material
Aluminum die-cast housing
Waterproof rate
P67
Lifetime
50000H
Voltage
12-24V
  • JOPOWER 36W 4.5" Round Flood Off Road LED Working Lights
  • JOPOWER 36W 4.5" Round Flood Off Road LED Working Lights
  • JOPOWER 36W 4.5" Round Flood Off Road LED Working Lights
  • JOPOWER 36W 4.5" Round Flood Off Road LED Working Lights
  • JOPOWER 36W 4.5" Round Flood Off Road LED Working Lights
  • JOPOWER 36W 4.5" Round Flood Off Road LED Working Lights

Description

Product Overview

The 36W 4.5-inch round flood lamp is the round-body option in our LED worklight range: a die-cast aluminium pod with twelve 3W LEDs behind a shatterproof polycarbonate lens, built to lay a wide, even pool of white light over the ground in front of a vehicle instead of a narrow tunnel reaching far down the road.

The round shape is the point. Plenty of vehicles already carry a circular opening — a factory fog-lamp hole, a bullbar clamp, a recessed bumper pocket — and a round body sits inside that shape instead of leaving the corners of a cube pod standing proud of the bodywork. It looks like it belongs there, which matters when the vehicle is a customer's daily driver rather than a dedicated toy.

Most of the buyers we ship this to are not building a show truck. They are parts shops and workshops who want one dependable lamp that fits whatever rolls into the bay, and drivers who need to see a farm gate, a trailer hitch or the shoulder of a track after dark. It ends up as a pair of off road lights across a ute's bumper, as a single reverse lamp on a trailer, or as the working light on a tractor that spends its evenings in the yard.

Heat and water decide whether a work lamp survives a season, so the housing here is cast rather than pressed and sealed rather than vented. Below you will find where the round body fits, what the flood pattern actually does, and how the cooling and sealing are put together.

Who It's For

  • Parts shops and accessory counters: buyers asking for round offroad lights normally already have a circular hole to fill, and the 4.5-inch body matches the fog-lamp openings most pickups and SUVs leave the factory with — the same openings most custom lights for trucks are made for.
  • Farms and agricultural dealers: fitting an LED worklight to a tractor, telehandler or grain trailer is usually about seeing a gate or a hitch after dark, and the round format matches the brackets already on most implements.
  • Repair workshops: when a sealed factory fog unit goes cloudy or fills with condensation, a bolt-on round lamp is often a faster answer than chasing an OEM part number.

Housing, Lens & Cooling

The body is die-cast aluminium rather than folded steel or a plastic case, and it is cast noticeably thicker than the slim pods that sell purely on price. That extra metal is not cosmetic: it gives the LEDs somewhere to dump heat, and heat is what shortens the life of any lamp. The rear of the housing is finned so air moving past the vehicle carries that heat away, and the assembly is closed rather than vented, which keeps the cavity dry. The lens is shatterproof polycarbonate. On a working vehicle that matters more than scratch resistance — a stone thrown up on a gravel track, a branch on a trail or a knock from a tool on the bench will crack a thin acrylic lens and leave you with a lamp half full of water. Polycarbonate takes the impact and keeps the seal intact. Sealing is where lower-specification custom off road lights fail first. A lamp that breathes in moist air on a cold night and cannot let it out ends up with condensation on the inside of the lens, and that slowly turns into a haze you cannot wipe away. The gasket and the cast body are there to keep mud, dust and road spray on the outside. Rinse the mud off rather than driving a pressure-washer jet straight at the lens-to-housing seam, and check the bracket bolts after the first few hundred kilometres of rough road.

Round Housing Fitment

Round offroad lights are chosen for the shape of the hole more often than for the shape of the light. On a vehicle with a factory fog-lamp opening, a 4.5-inch round body fills the recess and reads as original equipment; on a bullbar or front bumper it mounts flat against the tube instead of needing a plate welded on first. The positions this lamp is normally used in are the OEM fog-light holes, the front bumper, the bullbar, the hood, the A-pillar, the roof rack and the rear bumper — anywhere there is a round face to bolt to and enough flat surface behind it for the bracket.

The bracket decides whether 4x4 off-road lights or custom lights for trucks end up pointing where you want. This one is a side-mounted arm on a single pivot bolt: slacken the bolt, tilt the lamp through its arc, tighten it again. That matters on a bullbar, where the bar's own angle is rarely level, and on an A-pillar, where the lamp has to be pulled in towards the vehicle to keep the beam off the windscreen and off the paint. Before you drill, check the depth of bodywork behind the mounting face — this housing is thicker than a slim pod, and a shallow recess can leave the back of the lamp resting against a grille or a panel.

It also swaps into places where a factory unit has failed. Plenty of vehicles leave the line with sealed led driving lights that cannot be opened or repaired, and when one fogs up or takes a stone the owner is quoted for the whole unit. A bolt-on round lamp restores the function without the part-number hunt, and because the face is a standard 4.5-inch round, it also suits brackets and guards already sold for that size.

Flood Beam & Visibility

  • Flood, not spot: the beam spreads wide and low across the ground in the first stretch ahead of the vehicle, which is what you want for reading a track edge, a gate, a ditch or a trailer coupling. A spot would reach further down the road but leave the ground at your bumper dark.
  • Even coverage across the width: the emitters sit spread across the face rather than crowded behind one hot centre, so the pool of light holds up from edge to edge instead of falling away at the sides.
  • Useful as driving lights alongside your headlights: mounted low on the bumper or in the fog position, the lamp fills the near field the headlights throw past — the part of the road you actually need when something steps out.
  • More usable in dust, rain and snow than a long-throw spot: a wide, low pattern puts light on the surface rather than into the haze hanging in front of the vehicle.
  • Suits vehicles already running led driving lights: adding a pair of wide floods at bumper height gives a near-field wash without touching the factory beam pattern or the headlight aim.
  • Aiming: park on level ground, slacken the pivot bolt, set the top edge of the beam just below horizontal, then tighten. Too high and the light washes out into the distance and glares oncoming traffic; too low and you are lighting a few metres of tarmac.
  • Fit them in pairs where you can: two lamps on a bumper give a wider, more even spread than one, and they can be aimed slightly apart to cover the shoulder on both sides.

Applications

  • Night driving on unlit trails and desert tracks: the case most people buy off road lights for — a wide flood at bumper height shows the track edges, washouts and rocks that dipped headlights skip over.
  • Farmyard and implement work: an LED worklight on a tractor, telehandler or feeder wagon, aimed down at the ground where the headlights do not reach.
  • Trailer, boat and ramp work: a single lamp on the rear bumper or trailer frame lights the coupling, the ramp and the water's edge when you are hitching up or reversing in the dark.
  • Site and yard vehicles: tippers, vans and plant working after dark get a wide wash across the ground in front of the machine, which does more for a driver than another set of long-range driving lights.
  • Bullbar-mounted 4x4 off-road lights: clamped to the bar and aimed a touch down, the pair covers the shoulder on both sides of a narrow track.
  • Workshop and yard lighting: bolted to a wall, a frame or a loading-bay post, the same lamp works as general floodlighting over a bench or a trailer bed.

Specifications

SpecificationDetail
BrandJOPOWER
Model36W 4.5" Round Flood Off Road LED Working Lights
Power36W
LED chips12 × 3W
Beam typeFlood
Input voltage9-30V DC
Waterproof ratingIP67
HousingDie-cast aluminium, 1.3 inch thick
LensShatterproof polycarbonate
Rated life50,000 hours
MountingSide bracket with a single pivot bolt
Typical positionsFog-light hole, front bumper, bullbar, hood, A-pillar, roof, rear bumper

Ordering & Delivery

  1. Match the lamp to the mounting point. Send a photo of the opening and tell us the vehicle; we will confirm that the round 4.5-inch body suits the position and clears whatever sits behind it before you commit to a quantity.
  2. Confirm the hardware. Tell us whether you want the bracket and bolts supplied with each lamp, so your fitter is not hunting for a matching nut on the day.
  3. Walk through the electrical side — whether the vehicle runs 12V or 24V, and whether you are switching through an existing circuit or building a custom off road lights setup with a switch panel and relay.
  4. Plan quantities around how you sell: ones and twos for a counter, matched pairs for a fitter, larger runs for a reseller.
  5. Flag it early if the order is for custom lights for trucks rather than a single repair, so quantities and packing are planned from the start.
  6. Confirm stock and timing. In-stock items ship on our 7-day fast shipping schedule, and your sales contact will confirm current availability and dispatch dates before you schedule a build.
  7. Ask about after-sales. Warranty and defect handling are agreed per order — settle them with your sales contact before the first repeat order rather than after a failure.

Scale & Supply Capability

JOPOWER is the brand of our own factory in Dongguan, China, founded in 2010 and run by a team of 20–30 people with 15 years of vehicle lighting production behind them. We add 5–10 new styles every month, hold EU, CE, RoHS and US DOT certification, and put every unit through three full inspections before it leaves us. Because the designs are developed in-house, we can tailor specification, style, size, color, logo and packaging, and items in stock ship in as little as 7 days.

Factory overview with production lines, CNC workshops and testing labsService infographic for OEM, custom packing, logo, color and partsSix-step customization process infographic for customer orders

FAQ

Will these round offroad lights fit a factory fog-light opening?

In most cases yes. A 4.5-inch face is a common size for fog-lamp recesses on pickups, SUVs and 4x4s, and the round body is built to sit inside that circle. Measure across the opening and check the depth behind it first, because this housing is thicker than a slim pod and some recesses are shallow. If you are unsure, send a photo of the opening with a tape measure across it and we will tell you whether it will seat properly.

What does a flood beam give me that a spot does not?

A flood spreads light wide and low over the ground close to the vehicle; a spot concentrates it into a long throw. For a bumper-mounted pair used as driving lights in fog, dust, rain or tight trails, the flood is usually more useful because it shows the surface you are about to drive on rather than a patch of road a long way out. If your headlights already reach far, a flood fills the gap they leave in front of the bumper.

Can I run one on a 24V truck?

Yes. The driver accepts anything from 9 to 30 volts, so the same lamp works on a 12V pickup, a 24V truck or a piece of plant with a 24V system. There is no converter to add and no separate 24V version to order. If the vehicle's charging system can spike above that range, have it checked before you connect the lamp.

Will water get in after a river crossing or a pressure wash?

The housing is sealed to IP67, which covers dust and short immersion, so a bow wave on a river crossing or a wet track will not flood the inside. Pressure washers are the usual culprit: a jet can force water past a gasket that would never leak in rain, so keep the nozzle back from the lens-to-housing seam and rinse rather than blast. If you do see condensation, take the lamp off the bracket and let it dry in the sun before refitting.

Can the beam be aimed after the lamp is bolted on?

Yes. The bracket pivots on a single bolt, so you can slacken it, tilt the lamp and lock it again without removing anything from the vehicle. Park on level ground facing a wall or a garage door, set the top of the beam just below horizontal, then check the result on a dark road. Re-aim after loading the vehicle, because weight in the back lifts the nose and raises the beam — the same adjustment most led driving lights need once the vehicle is at its working weight.

Can I use one of these off road lights as a reverse lamp?

Yes, and it is one of the more useful places for a single lamp. Mounted on the rear bumper or trailer frame and aimed down and back, it lights the coupling, the ramp and the ground behind you when you are hitching up or reversing in the dark. Wire it through a switch or tap the reverse circuit, and keep the aim low so it does not shine into the mirrors of the vehicle behind.

What is the correct way to mount 4x4 off-road lights on a bullbar?

Clamp the bracket to the top or the front face of the bar, not underneath where it will catch on the first steep approach angle. Position the lamp so the pivot bolt is still accessible once it is fitted, aim the pair slightly apart and a touch down, and run the cable along the bar with clips at intervals instead of letting it hang. Check the bolts again after the first long drive on rough ground.

CONTACT US

If you have any queries, get in touch today! Don't hesitate. We try to take the extra step for our customer satisfaction.
Name *
Email *
Phone / Whatsapp
Message *
Verification code *
Click to verify