Jopower Cube Led Work Light Pods, 40w - light bar Manufacturer
  • JOPOWER 3 Inch Cubes LED Work Light Pods Ultra Bright LED Flood Light
  • JOPOWER 3 Inch Cubes LED Work Light Pods Ultra Bright LED Flood Light
  • JOPOWER 3 Inch Cubes LED Work Light Pods Ultra Bright LED Flood Light
  • JOPOWER 3 Inch Cubes LED Work Light Pods Ultra Bright LED Flood Light
  • JOPOWER 3 Inch Cubes LED Work Light Pods Ultra Bright LED Flood Light
  • JOPOWER 3 Inch Cubes LED Work Light Pods Ultra Bright LED Flood Light
  • JOPOWER 3 Inch Cubes LED Work Light Pods Ultra Bright LED Flood Light

JOPOWER 3 Inch Cubes LED Work Light Pods Ultra Bright LED Flood Light

  • JOPOWER 3 Inch Cubes LED Work Light Pods Ultra Bright LED Flood Light
  • JOPOWER 3 Inch Cubes LED Work Light Pods Ultra Bright LED Flood Light
  • JOPOWER 3 Inch Cubes LED Work Light Pods Ultra Bright LED Flood Light
  • JOPOWER 3 Inch Cubes LED Work Light Pods Ultra Bright LED Flood Light
  • JOPOWER 3 Inch Cubes LED Work Light Pods Ultra Bright LED Flood Light
  • JOPOWER 3 Inch Cubes LED Work Light Pods Ultra Bright LED Flood Light
  • JOPOWER 3 Inch Cubes LED Work Light Pods Ultra Bright LED Flood Light

Description

Product Overview

We are led light bar manufacturers based in Dongguan, and the 3-inch cube pod is the compact end of what we build. Each pod runs 40W of LED behind a high-transmission lens and produces a combined spot and flood beam, in a square housing small enough to mount where a long bar will not fit.

Most of the offroad led lights we ship leave in pairs, and this pod suits that pattern. Two units aimed differently give a driver a working pool of light close to the vehicle and a longer throw further up the trail, usually more useful than one wide wash. The housing bolts to a bumper, headache rack, trailer frame, roll cage or cab roof through an adjustable stainless steel bracket.

Buyers tend to be auto parts distributors, 4x4 and off-road shops, repair garages, fleet workshops and e-commerce sellers who want one compact unit to cover a long fitment list. They are often bought alongside a mini led light bar: the bar handles the wide picture, the pods pick out the close work, and the two are usually switched separately.

Dual-Color Beam Output

  • Yellow 3500K for fog and dust — The low beam sits at 3500K, the amber range that cuts under fog, snow, blowing dust and heavy rain instead of bouncing back into the driver's eyes. It is the setting for a smoky morning on the trail or a foggy stretch of highway.
  • White 6000K for distance — Switch over and a crisp 6000K white takes the place of the yellow, with the reach the amber beam trades away. Nothing about the housing changes; only the output the driver selects.
  • Spot and flood in one lens — The lens splits the light into a spot section for distance and a flood section for width, so one pod covers the road ahead and the ground around it. That combined pattern is what lets the same unit work as led driving lights on the move and as a work light once the vehicle stops.
  • A clear, high-transmission lens — Light leaves the LED array through a high-transmission lens with reflector cups behind it, so the pattern is shaped at the lens instead of spilling out of an open housing. The lens sits flush in the square bezel and wipes clean in seconds.
  • One part number, many fitments — The universal bracket and the dual output mean a reseller can cover pickups, tractors, side-by-sides and plant with one line, instead of splitting stock between a led light bar for trucks and a separate pair of work lamps.
  • Switchable from the cab — The driver changes yellow to white at the switch as the weather turns, so the same lamp handles a foggy start and a clear run home. Fleets like it because one fitment then covers vehicles working in different conditions.

High-Standard Protection

Water usually finds its way into an auxiliary light at the lens joint rather than through the housing, so that is where the attention goes here. The lens is bedded on premium gaskets, the assembled lamp carries an IP67 water and dust rating, and the aluminum profile itself is rated IP68. Between them that covers what these lights actually meet: hours of highway rain, spray off wet gravel, dust on a summer trail, and the mud that dries on afterwards.

The seal also decides whether a lamp fogs from the inside. A lens that breathes moist air fogs within a season, and once water sits behind the glass the output dulls and the electronics live in damp. Compressing a proper gasket between lens and housing keeps the interior dry, and that is the difference between a light that lasts several seasons and one that comes back as a return.

The lens is impact-resistant polycarbonate rather than glass, so a stone thrown up by a front tyre is more likely to mark it than to shatter it. On gravel roads, and on machinery working close to the ground, that is the impact that happens most often.

Two notes worth passing to the fitter. Do not hold a high-pressure washer against the joint between lens and housing; the seal is built for rain and spray, not for a jet at close range. And if a pod is ever opened, fit a new gasket rather than reusing a compressed one.

For anyone stocking offroad led lights, this is the part of the build that decides how many come back. A waterproof claim printed on a box is low-cost to print; a gasket that stays compressed through a winter is what the customer actually experiences.

Housing & Heat Dissipation

HousingAviation-grade die-cast aluminum alloy body
Body profile6063 aluminum alloy profile with a high-quality surface finish
CoolingOversized heat sinks formed into the body
Rear sectionFinned rear heat sink that adds surface area for airflow
Thermal pathHeat from the LEDs moves into the aluminum rather than sitting in the housing
VibrationDie-cast construction holds its shape on rough ground and machinery
FinishMatte black housing

Adjustable Mounting Bracket

  1. Check the hardware first. Each pod arrives with its U-shaped bracket, threaded mounting studs, bolts, nuts, washers and a hex key, and the power cable is already attached to the housing.
  2. Choose a flat surface with clearance behind it. The bracket needs room to swing through its arc, and the cable needs a route that will not rub against bodywork.
  3. Hang the bracket and leave it loose. Set the U-bracket on the mounting point and pass the bolts through by hand, so the angle can still move.
  4. Set the angle for the job. Tilt the lens down for a pool of light right in front of the vehicle, hold it level for a longer throw, which is how most led driving lights are aimed on a road vehicle, or angle it up when the pod sits low on a bumper. The multi-angle bracket covers all three without shims.
  5. Tighten in stages. Work around the fixings instead of winding one down fully, so the bracket seats flat and the aim does not creep as the last bolt goes tight.
  6. Re-check after the first run. New fixings settle under vibration; a second pass with the hex key after the vehicle has been out once keeps the aim where it was set.

Mounting Positions & Applications

  • Trucks and trailers — Front bumper, headache rack or rear body. The rear pair is what drivers use for hitching and unloading after dark, and it is the position most fleets running a led light bar for trucks still leave uncovered.
  • ATV, UTV and side-by-sides — Roll cage, front rack or a compact bumper bar. Buyers who already run a led light bar for atv lighting add a pair of pods to light the ground under the wheels, which the bar cannot reach.
  • Jeeps and 4x4 builds — Cowl, A-pillar, bumper or roof rack. Where a mini led light bar would sit high and proud, a pair of pods keeps the build lower and tidier.
  • Tractors and farm equipment — Cab roof, loader arm and the rear of the implement. Light on the loader arm is what turns stacking bales or loading grain after dark into a one-person job.
  • Site plant and machinery — Excavators, telehandlers, forklifts and utility carts. Aimed down, a pod lights the working area rather than the cab roof, and the sealed lens takes the dust that comes with the job.
  • Boats, trailers and utility vehicles — Deck lighting, trailer ramps and small work boats. Salt air is the hard test here, so hose the housing down after a trip and check the lens seal at the start of each season.

Ordering & Delivery

  1. Start with the fitment. As led light bar manufacturers we quote from the factory, and the first note we need is what the pods are going on, what the system voltage is, and where they will be mounted.
  2. Add the details that change the answer — a quad running a led light bar for atv set-up, a tractor on 24V, or a truck with an existing switch panel. Those notes decide the bracket, the hardware and how the pods are wired.
  3. Confirm the commercial terms for the order — quantity, unit price, payment method and production lead time — with your sales contact, and mention if this pod is joining a led driving lights range you already stock so the quote matches the mix.
  4. Ask about branding if you sell under your own label. Logo, packaging and specification options are quoted per project through your sales contact.
  5. Shipping runs on 7-day fast shipping; your sales contact will confirm the dispatch date against the quantity and configuration you approve.
  6. Confirm the packing format and the documents your market needs before dispatch, so nothing is held at the border.

Scale & Supply Capability

JOPOWER is the brand of our own factory in Dongguan, China, founded in 2010 and run by a team of 20–30 people with 15 years of vehicle lighting production behind them. We add 5–10 new styles every month, hold EU, CE, RoHS and US DOT certification, and put every unit through three full inspections before it leaves us. Because the designs are developed in-house, we can tailor specification, style, size, color, logo and packaging, and items in stock ship in as little as 7 days.

Factory exterior and company profile of Dongguan Spotlight LightingFactory capabilities infographic with production lines, CNC workshops and testing labsInfographic of OEM/ODM and customization services for LED automotive lightingInfographic of the customization process from contacting customer service to contract

FAQ

What beam pattern do these cube pods produce?

Each pod throws a combined spot and flood beam: a tighter centre for distance and a wider skirt for the ground around the vehicle. That is different from a single-purpose lamp. Where a led light bar for trucks gives one fixed pattern, this pod splits the output and adds the yellow or white choice on top. For close work the flood section does most of the job; on open ground the spot takes over.

When is the yellow 3500K output the better choice?

Yellow is the setting for anything that throws light back at the driver: fog, snow, blowing dust and heavy rain. At 3500K the beam sits in the amber range, so less of it reflects off the water in the air and the driver keeps a usable view of the road edge. Switch to the 6000K white once the air clears. Most of the offroad led lights we sell are bought for exactly this split, one lamp that handles a foggy commute and a clear night.

What comes with each pod?

Every pod ships with its U-shaped mounting bracket, threaded mounting studs, mounting bolts, nuts, washers and a hex key. The power cable is already attached to the housing, so the fitter runs cable rather than opening the lamp. A pair can therefore be mounted and wired without a trip out for hardware.

Should I fit these instead of, or alongside, a light bar?

Alongside, in most builds. A bar gives one wide sweep and is hard to beat on open road; a pair of pods gives you light where the bar overflies, which means the ground in front of the bumper, the working area behind a truck or the row beside a tractor. Shops that already stock a mini led light bar often add these pods for customers who want the close field covered as well as the distance.

Will they fit an ATV or a side-by-side?

Fitment is universal, and the pod is small enough for a cage, front rack or compact bumper bar where a full-width lamp would be vulnerable. Buyers fitting a led light bar for atv use usually take a pair of these at the same time, because the bar lights the trail ahead and the pods light the ground under the wheels.

Are these work lights or driving lights?

Both, depending on how they are aimed and which colour is selected. Angled down with the yellow output they are work lights for hitching, loading and close inspection; raised and switched to white they behave as driving lights with a longer throw. As led light bar manufacturers we build the pods and the bars on the same lines, so the sealing and mounting practice is shared across both.

CONTACT US

If you have any queries, get in touch today! Don't hesitate. We try to take the extra step for our customer satisfaction.
Name *
Email *
Phone / Whatsapp
Message *
Verification code *
Click to verify