Jopower 3.5" Led Cube Pods Work Lights - led light bar Supplier
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep

JOPOWER 3.5" LED Cube Pods Work Lights for Jeep

The JOPOWER 3.5" LED Cube Pods Work Lights are compact and powerful, designed for Jeeps to provide excellent illumination for off-road adventures and tough conditions.
Brand
JOPOWER
Material
Aluminum die-cast housing
Waterproof rate
P67
Color temperature
6000k
Lifetime
50000H
Working Temperature
-40-80℃
LED Color
Yellow
Working voltage
12-24v
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep
  • JOPOWER 3.5" LED Cube Pods Work Lights for Jeep

Description

Product Overview

The 3.5-inch cube pod is the smallest shape in the JOPOWER range, and the one that fits where a bar will not go: a bumper corner, an A-pillar, a bed rail, a roof rack leg or the frame of a farm implement. It is a sealed square work light — die-cast aluminium body, shock-proof PC lens, bolt-on bracket — built to be aimed once and then left alone. It is a working lamp rather than a styling piece. The yellow beam holds the edge of a track when the headlights have already given everything they have, and it stays readable in the dust thrown up by the vehicle in front — the difference between offroad led lights that get used every night and ones that sit in the box. The same pod runs on either vehicle system voltage, so a shop can stock one part number and fit it to a Jeep, a side-by-side, a pickup, a tractor or a yard truck. Most buyers arrive from one of three directions: a parts store adding an entry-level auxiliary light, an installer fitting a customer's Jeep or UTV, or a fleet and workshop buyer who wants one work lamp that suits every vehicle on site. More often than not the pod replaces a halogen work lamp that has finally given up, or a low-cost cube that let water in during its first winter. It also completes a kit. A driver buys a jeep led light bar for distance, then adds a pair of cubes to light the ground immediately in front of the vehicle — the near field a long bar never quite reaches. We ship these pods alongside bars far more often than on their own, which is the pairing most off road led light bar suppliers end up recommending for trail and work vehicles.

Banner of automotive LED light bars and pod lights, factory production.About-us page for Dongguan Spotlight Lighting Co., Ltd, LED lighting manufacturer.Factory infographic showing production lines, CNC workshop, lab and testing.Service banner: reasonable price, OEM service, free design, ready stock.Infographic of OEM/ODM services and custom options for lighting.Infographic outlining six-step customization and ordering process.

Product Advantages

  • 3570 high-intensity chips behind a focused reflector. Each pod is built around 3570 LED chips and a multi-chip reflector, so the beam stays tight enough to pick out a rut, a fence line or a winch anchor instead of washing out into wide glare.
  • Thickened finned heat sinks. The fins pull heat away from the chips, which is what stands behind the rated service life and the wide working-temperature range; output stays steady instead of fading as the pod warms up.
  • Less maintenance over the life of the vehicle. Fewer replacements, fewer comebacks and less downtime — for a fleet, the saving shows up in the workshop diary rather than on an invoice.
  • Matched to our bars and whip lights. Cubes come off the same lines as the rest of the range, so a dealer who already sources from led light bar manufacturers can add a pod to a 12v led light bar order and keep housing finish and connector style consistent. Beyond the trail, the pods earn their place in agriculture, construction and vehicle recovery, where the driver needs to see the ground, the load or the shoulder clearly before making the next move.

Mounting & Wiring

  1. Choose the mounting point before you drill. Bumper corner, A-pillar, roof rack rail, bed rail or implement frame — check that the bracket has room to pivot and that the rear cable has a clear run back into the vehicle.
  2. Hold the U-bracket against the surface and mark the fixing holes. A pod set slightly outboard sees past the bodywork; one tucked too far in throws light onto the bonnet. If the vehicle already carries a jeep led light bar, line the pods up with it so both lights sit at a consistent height.
  3. Bolt the bracket down and leave the pivot bolt finger-tight, so the pod can still be aimed once it is powered up.
  4. Aim on level ground with the lights on: a little down and slightly outward gives a usable near-field spread without dazzling oncoming traffic. Tighten the pivot when the pattern looks right.
  5. Run the rear cable clear of exhaust, belts and steering components, and fit a grommet wherever it passes through panel work.
  6. Connect through a fused relay and a dash switch. The pod accepts either system voltage, but the relay, fuse and switch must be rated for the circuit you are tapping — the fused relay and switch used on a 12v led light bar installation for trucks will run a pair of cubes comfortably.
  7. Power up at night, check the pattern against a wall and on open ground, then re-torque the fixings and touch in any bare metal around the holes.

Industry Applications

Anywhere a vehicle is expected to keep working after sunset, a pair of cubes on the front or the rear earns its place. The pattern repeats across trades: the light is not there to look good, it is there so the last hour of a shift is as safe and as productive as the first.

In agriculture the pods go on tractors, telehandlers, sprayers, grain trailers and livestock trucks. On a loader arm they show the pallet, the gate latch or the trailer hitch at four in the morning; on the back of a trailer they show the operator what is behind before reversing into a barn doorway. On construction sites the same pods sit on site pickups, excavators, dumpers and rollers, where lighting the ground crew, the trench line and the edge of an excavation is what keeps a dusk shift moving. The sealed housing also shrugs off cement dust and washdown, the two things that finish unprotected lamps in a season.

Recovery and towing crews fit them for the winch line, the strap, the wheel position and the soft shoulder. Quarries and mines use them on haul roads and around plant. Forestry, municipal winter service and marina ramps follow the same logic: a small sealed lamp on a bracket, aimed where the driver actually needs to see.

Fleets that already mount the led light bar for trucks on their road vehicles add cubes to the machines that never leave the yard, so the same switch layout and the same spare-part number work across the whole fleet. The return is operational rather than cosmetic: fewer jobs abandoned at dusk, fewer reversing incidents, less damage to plant and property, and a lighting check that fits into a pre-start walkaround. The compact cube shape leaves room to tuck the lights into tight corners of a bumper, rack or cab, and the die-cast housing shrugs off the corrosion, grit and knocks that come with regular off-road use.

- Night trail navigation. On a Jeep or 4x4 the jeep led light bar on the roof does the distance work; the cubes pick up the verge, the ruts and the drop at the edge of the track. The warm beam keeps glare down when the vehicle ahead is throwing dust. - Winch recovery after dark. One pod aimed at the anchor point means nobody has to hold a torch while the cable is tensioned; the second pod follows the cable run back to the vehicle. - Campsite and trailer setup. Reversing a trailer onto a pitch, finding the levelling block or packing up at five in the morning turns from a torch job into a two-minute one with a pair of cubes on the rear of the truck. - Construction site at dusk. Machine edges, spoil heaps, ground crew and the route back to the gate — all of it stays visible after the site lights have been switched off for the night. - Field and farmyard work. Hitching an implement before daylight, loading feed or checking livestock: the pods throw a wide, warm pool that is easier on the eyes than a cold white beam, and they keep working through the dust and washdown that kill cheaper offroad led lights. - Roadside repair and towing. A wheel change, a strap on a shoulder or a trailer hook-up after dark is safer when the working area is lit and the vehicle is visible to passing traffic.

Specifications

The warm 3500K beam cuts through fog, dust and blowing snow better than a stark white light, which is why it is the tone most operators ask for when visibility is already poor.

SpecificationDetail
BrandJOPOWER
Model3.5" LED cube pods work lights
HousingDie-cast aluminium
LensShock-proof PC
Waterproof ratingIP67
LED chips3570 high-intensity
Light colourYellow (amber lens)
Colour temperature3500 K
Working voltage12–24 V DC
LifespanUp to 50,000 hours
Working temperature-40 °C to 80 °C
MountingBolt-on bracket with adjustable aim
OptionsCustom size, colour, logo and packaging

Customisation Options

OptionWhat we can tailor
Housing finishMatte black die-cast aluminium as standard
Lens and cover colourYellow/amber as standard; other colours to suit your market
Pod sizeHousing and bracket dimensions built to your programme
LogoYour brand mark on the housing or on the packaging
PackagingCustom cartons, inserts and printed packaging artwork
Custom buildsDeveloped from your drawing or from a sample you supply
Beam colourConfirmed with you against the lens you choose

Ordering & Delivery

  1. Send us the vehicle types, the mounting positions and the quantity you need.
  2. Confirm the build against the way you sell: lens colour, logo and packaging.
  3. Approve the artwork, and ask your sales contact about sample availability and current terms if your programme needs a sample first.
  4. We build, inspect and pack the order on the same floor as our bars, so pods and bars can be consolidated into a single shipment — one of the practical advantages of buying from led light bar manufacturers who also make pods.
  5. Stock items ship under our 7-day fast shipping; a made-to-order configuration takes longer, and your sales contact confirms the date before production starts.
  6. Ready to work with us? Send your list — as off road led light bar suppliers we can quote pods and bars together and dispatch them as one order.

Scale & Supply Capability

JOPOWER is the brand of our own factory in Dongguan, China, founded in 2010 and run by a team of 20–30 people with 15 years of vehicle lighting production behind them. We add 5–10 new styles every month, hold EU, CE, RoHS and US DOT certification, and put every unit through three full inspections before it leaves us. Because the designs are developed in-house, we can tailor specification, style, size, color, logo and packaging, and items in stock ship in as little as 7 days.

FAQ

What materials are used in these cube pods?

Die-cast aluminium for the housing, shock-proof PC for the lens, and an IP67 seal over the whole unit. Aluminium does two jobs here: it survives knocks and pulls heat away from the chips. The PC lens is what stands between the LED face and the stones thrown up by the tyres. A bolt-on bracket and a rear power cable complete the assembly, and the same material standard is the one led light bar manufacturers apply to a much larger lamp.

Will a 3.5-inch pod fit my Jeep, UTV or pickup?

The pod is small — 3.5 inches across the face — and the bracket is a bolt-on U-shape, so the limit is usually the mounting surface rather than the light itself. Bumper corners, A-pillars, roof rack rails, bed rails and headache racks all take a pair comfortably. What we cannot give you is a fitment chart for every model year, because bumper shapes and rack designs vary too much: measure the flat area you have, check the bracket can pivot without fouling trim, and ask us to confirm the mounting point if you are unsure.

How do I install a pair on my vehicle?

Bolt the bracket down, route the rear cable clear of heat and moving parts, then take the feed through a fused relay to a dash switch. Mount both pods before you connect anything — aiming is far easier when the vehicle is on level ground and both lights are on at once. The 12v led light bar wiring kit most workshops keep on the shelf will run a pair, and because the pod accepts either system voltage, the relay and switch are the parts you match to the vehicle.

How long do they last and what maintenance do they need?

Up to 50,000 hours, helped by the finned aluminium heat sinks and the sealed housing — in most installations the light outlasts the vehicle it was fitted to. Upkeep is small: wipe the lens when dust builds up, check the bracket bolts after the first long run on rough ground, and look at the cable entry once a season. When an offroad led lights unit does stop working, the cause is usually the connection rather than the chip, so start with the plug and the earth before replacing anything.

Can you customise the pods for my brand or vehicle requirements?

Yes — size, colour, logo and packaging can all be adapted to your programme. Send the housing size you have in mind, the lens or cover colour your market asks for, the logo file and the carton artwork, and we will come back with a configuration. Custom pods run on the same lines as the standard build, so sealing, chips and heat sinks do not change; only the finish, the badge and the box do. It is the same custom route we already run for our bars, so a buyer switching their off road led light bar suppliers to us can keep their branding unchanged.

Do they work on 24 V trucks and mixed fleets?

One pod covers both. The input range runs from 12 V to 24 V DC, so the same unit goes onto a pickup, a side-by-side and a 24 V site truck without a separate part number. Mixed fleets are the main reason we build it this way: fewer variants to stock and fewer wrong-part returns at the counter.

Can I run the pods alongside the light bar I already have?

Yes — a pair of cubes is usually added to a vehicle that already runs a bar, with the bar doing distance and the cubes lighting the ground in front of the bumper. Wire them to their own switch if you want to use them alone at camp, or share the existing circuit if the fuse and relay ratings still cover the extra draw. If the led light bar for trucks on the vehicle runs from a switch panel, check that the panel has a spare channel before you add the pods.

ARE YOU READY TO WORK WITH US?

Contact US